Chevron down icon

MVP-60 Vapor Recovery Pump

by BHOGART

$7,545.00

SKU 25C943

Power

Quantity

The ORIGINAL Master Vapor Pump

C1D1 rated for use in hazardous locations. It can be used to transfer hydrocarbons, alcohols, and many other solvent vapors up to a maximum operating pressure of 60PSI. Wetted parts of the pump do not need any grease, ensuring clean operation, and no contamination of extract.

To ensure safe operation, the back of the diaphragm chamber is pressurized with CO2 as a failsafe to prevent oxygen from getting into the system, in the event of any part failures. Being easy to maintain and operate, as well as efficient in power usage, these pumps are well suited to a wide variety of solvent recovery applications.

FEATURES & BENEFITS

For LP-Gas Recovery
Electric-Powered
Dual - Diaphragm
Explosion-proof Motor
Stainless Steel wetted parts
Rated MAWP: LPG-350-PSI

MVP-60 Models

Models	Motor	Pump
MVP-60-1PH	1 HP 1 Phase	Yes
MVP-60-3PH MVP-60ATEX	1 HP 3 Phase	Yes

Pumphead Charge
Flow Rate	6 cfm
Butane Recovery Rate	1-2 lb/min
Butane Re-Condense Rate	12 GPH
Maximum Pumping Outlet Pressure, cnt.	60 PSI
Maximum Pumping Outlet Pressure, int	70 PSI
Maximum Pumping Inlet Vaccuum Produced	27 inHg
Center Section Co2 Charge Range, cnt.	5 - 70 PSI
Center Section Co2 Charge Range, int.	80 PSI
Equipment Withstand Pressure	350 PSI
Maximum Co2 Consumption	<0.2 scfh
Co2 Inlet Size	1/4 in. npt(f)
Maximum Pump Speed	190 cpm
Process Inlet And Outlet Size	1/2 in. JIC male
Optional Pressure Gauge Ports: inlet / outlet	1/4 in. npt(f)
Weight	182.5 lb

Noise Data
Sound Power (measured per ISO-9614-2)	70 PSI
Sound Pressure (tested 3.28 ft [1m] from equip.)	5-80 PSI

Electrical / Maintenance - MVP-6CFM-1HP
Power	1 HP
Speed	1800 rpm (60Hz)
Gear Ratio	9.41
Voltage	3-phase 208-230/460V
Maximum Amperage Load	3.3A (230V) / 1.65A (460V)

Electrical / Maintenance - MVP-6CFM-3HP
Power	1 HP
Speed	1800 rpm (60Hz)
Gear Ratio	9.41
Voltage	1-phase 115/208-230V
Maximum Amperage Load	13.4A (115V / 2.7A (230V)

Materials
Process Pressure and Reed Valves	Stainless steel
Diaphragms	FKM fluoroelastomer, PTFE
Process Vapor Temp. Range	FKM: -40° to 275° PTFE: -40° to 220°F

Filters

Equipment

MVP-60 Vapor Recovery Pump