Cart 0

7.2 Vacuum Purging Oven w/ Direct Surface Heating

CURRENTLY ON BACKORDER, PLACE ORDER TO RESERVE UNIT. CONTACT US FOR DELIVERY DATES AND INFORMATION. EXPECTED DELIVERY OCTOBER 21st

  • Direct Surface Heating™
  • Nitrogen Inlet Port
  • Desiccant Chamber and Oven Stand
  • Slab Space™: 462 inches² per shelf, 6 shelves, 2772 inches² total.

slabspace-comparison_72

Ovens do not include:

KF25 Vacuum Hose

KF25 Vacuum Clamps & Gaskets

Vacuum Oven Check Valve (HIGHLY RECOMMENDED)

Business Financing available BELOW

$8,099.00

In stock

PTFE PURGING SURFACE (10% off)

Fiberglass reinforced PTFE sheets are the ultimate surface for vacuum oven purging. Non-reactive with butane and propane, our sheets are safe to use at up to 550° F (287.8° C).

Rolls are 14″ x 720″ (35.5cm x 18.3 meters), .07mm thickness, and reinforced with fiberglass fabric.

PTFE Rolls purchased with any BHOgart oven receive 10% off

Product ID: 1353 SKU: 100-0075. Category: .

The BHOgart 7.2 Vacuum Purging Oven offers laboratory grade vacuum degassing in industrial sized proportions. With 2772 square inches of SlabSpace™ this badass oven has everything you need to start mass production. Its sleek black design is insulated to prevent heat loss. Each shelf is precision engineered and individually heated to ensure maximum heat transfer, and effectiveness. The viewing window is made of bulletproof glass with a silicone seal for maximum temperature and pressure resistances.  The oven also comes with lab safe wheels to make moving the heavy oven around your lab safe and easy.

Direct Surface Heating™ 

Each shelf has its own heating element embedded within giving you the closest contact and even distribution from the heat source to your extract. * This is extremely important since heat cannot  travel through a vacuum efficiently. Direct Surface Heating Technology allows for maximum Slab Space and precision temperature control. Why should anything else be between your heat source and your extract! Three PID controllers enable users to target shelf temperatures allowing for different results in the same oven!

Nitrogen Inlet Port

The BHOgart 7.2 vacuum oven also includes our specially designed 3/8″ barb for adding a nitrogen gas system to the BHOgart ovens. Nitrogen gas will speed up the degassing process by ensuring the air you let in is clean and 100% dry. Utilizing a dry gas keeps the extract pristine and clean by preventing degradation due to over boiling. Nitrogen gas purging can reduce purging times from 60-90 hours, down to just 24 hours!

Desiccant Chamber and Oven Stand

All BHOgart 3.2 and 7.2 Vacuum Purging Ovens come mounted on a stand with a cabinet below and lab safe wheels. The cabinet is designed to house filters, traps, or other elements that may be added to your oven. We’ve also installed a desiccant chamber below. These chambers can be filled with molecular sieve. This is a man-made crystal which absorbs small molecules like water or butane. Molecular sieve 3A is used to absorb water and can be used in the extractor itself to dry butane, and is reusable if regenerated with special care.  Molecular sieve 5A is used to absorb butane and water which helps to keep pumps from breaking while reducing drying time. Molecular sieve 5A is not reusable once its full, it cannot be regenerated. Molecular sieve increases pumps lifespan while speeding up the degassing process.

Why Use a BHOgart 7.2 Vacuum Purging Oven?

When degassing solvent, low temperatures are desired to prevent decomposition of the extracts volatile terpenes. Terpenes are the compounds that give an extract most of its aroma and other unique properties. It does not take much to evaporate terpenes, which is one of the reasons why you can smell them so easily. If you degas at too high of a temperature these compounds will boil off, leaving your extract with less aroma and flavor. BHOgart’s Direct Surface Heating™ gives you the control needed for maintaining those delicate ambient temperatures. The use of a BHOgart vacuum oven also prevents oxidation of the terpenes during the purging process by eliminating the oxygen and lowering the boiling point of your solvent. Doing so ensures that you have a repeatable process that always produces clean, solvent free extract.

Vacuum Oven includes:

  • Mounted stand with cabinet
  • Desiccant chamber
  • Wrench (2)
  • Vacuum hose
  • KF25 Barb hookup w/ gasket and clamp
  • Instruction manual

Business Financing available to qualified customers

Pick up your oven at our store in San Jose or we can ship it!

For shipping estimates please give us a call: 855-553-3887

Size: 7.2 Cubic feet

SlabSpace™: 462 inches² per shelf

Total of 2772 inches² of SlabSpace™

Amount of shelves: 6

Volts: 110V/60HZ

Watts: 850W

Temp range 50 degrees F – 482 degrees F

Temp Stability: +/- 5 degree F

Connection types: K25, and 1/4″ barbed nitrogen gas inlet port.

Ovens do not include:

KF25 Vacuum Hose

KF25 Vacuum Clamps & Gaskets

Vacuum Oven Check Valve (HIGHLY RECOMMENDED)

 

 

Weight 700 lbs
Dimensions 35 x 35 x 74 in

Be the first to review “7.2 Vacuum Purging Oven w/ Direct Surface Heating”

Top