BIGGEST, AND FASTEST
This pump is configured to transfer liquid solvents at temperatures as low as -60°C and as high as 104°C. This pump also shares many of the same features as the other MVP models, such as a C1D1 explosion-proof rating, no greased wetted parts, and a diaphragm chamber pressurized with CO2 as a failsafe.
Like the other MVP models, it can be used with a wide variety of solvents such as hydrocarbons and alcohols. This allows for a wide variety of additional functions, such as hot and cold cycling through heat exchangers to control temperatures on the unit, transferring of cold solvents with little to no vapor pressure, and spraying liquid solvent through falling film tubes to increase recovery rates.
FEATURES & BENEFITS
- For volatile solvents (LPG/Ethanol)
- Delivery and slurry circulation
- Dual - Diaphragm
- Hazardous Location Motor
- Stainless Steel wetted parts
- Rated MAWP: LPG-350-PSI
- Download Operators Manual
- Download Data Sheet
- Download Repair Manual
MVP-Liquid Models
| Models | Motor | Pump |
|---|---|---|
| LIQUID-1PH | 5 HP |
Yes |
|
LIQUID-3PH LIQUID-ATEX |
2 HP 3 Phase |
Yes |
| Pumphead Charge | |
|---|---|
| Maximum Pumping Outlet Pressure | 70 PSI |
| Maximum Center Section CO2 Change Range | 5-80 PSI |
| Equipment Withstand Pressure | 350 PSI |
| Center Section CO2 Consumption | <0.2scfh |
| Co2 Inlet Size | 1/4 in. npt(f) |
| Maximum Pump Speed | 135 cprn |
| Process Inlet And Outlet Size | 1 in npt |
| Weight | 173.2lb |
| Electric Motor | Explosion proof for C1D1 hazardous areas |
| Noise Data | |
|---|---|
| Maximum Pumping Outlet Pressure | 70 PSI |
| Center Section Co2 Change Range | 5-80 PSI |
| Electrical / Maintenance - MVP-LIQUID-1HP | |
|---|---|
| Power | 2 HP |
| Speed | 3600 rpm (60Hz) |
| Gear Ratio | 25.85 |
| Voltage | 1-phase 115-208 |
| Maximum Amperage Load | 20A (115V / 10A) |
| Electrical / Maintenance - MVP-LIQUID-3HP | |
|---|---|
| Power | 2 HP |
| Speed | 3600 rpm (60Hz) |
| Gear Ratio | 25.85 |
| Voltage | 3-phase 208-230 |
| Maximum Amperage Load | 5.2A (230V / 2.6A) |
| Materials | |
|---|---|
| Process Pressure and Reed Valves | Stainless steel |
| Diaphragms | PTFE, FKM |
| Process Vapor Temp. Range | FKM: -40° to 275° PTFE: -40° to 220°F Over Mold: -40° to 220° |
