Skip to content
Spring Cleaning Sale! Up to 60% off select products while supplies last.
Spring Cleaning Sale!

MVP Liquid Transfer Pump

$8,500.00
SKU 25E350

BIGGEST, AND FASTEST
This pump is configured to transfer liquid solvents at temperatures as low as -60°C and as high as 104°C. This pump also shares many of the same features as the other MVP models, such as a C1D1 explosion-proof rating, no greased wetted parts, and a diaphragm chamber pressurized with CO2 as a failsafe.


Like the other MVP models, it can be used with a wide variety of solvents such as hydrocarbons and alcohols. This allows for a wide variety of additional functions, such as hot and cold cycling through heat exchangers to control temperatures on the unit, transferring of cold solvents with little to no vapor pressure, and spraying liquid solvent through falling film tubes to increase recovery rates.

FEATURES & BENEFITS

 

MVP-Liquid Models

Models Motor Pump
LIQUID-1PH 5 HP
Yes
LIQUID-3PH
LIQUID-ATEX
2 HP
3 Phase
Yes

Pumphead Charge
Maximum Pumping Outlet Pressure 70 PSI
Maximum Center Section CO2 Change Range 5-80 PSI
Equipment Withstand Pressure 350 PSI
Center Section CO2 Consumption <0.2scfh
Co2 Inlet Size 1/4 in. npt(f)
Maximum Pump Speed 135 cprn
Process Inlet And Outlet Size 1 in npt
Weight 173.2lb
Electric Motor Explosion proof for C1D1 hazardous areas 

Noise Data
Maximum Pumping Outlet Pressure 70 PSI
Center Section Co2 Change Range 5-80 PSI

Electrical / Maintenance - MVP-LIQUID-1HP
Power 2 HP
Speed 3600 rpm (60Hz)
Gear Ratio 25.85
Voltage 1-phase 115-208
Maximum Amperage Load 20A (115V / 10A)

Electrical / Maintenance - MVP-LIQUID-3HP
Power 2 HP
Speed 3600 rpm (60Hz)
Gear Ratio 25.85
Voltage 3-phase 208-230
Maximum Amperage Load 5.2A (230V / 2.6A)

Materials
Process Pressure and Reed Valves Stainless steel
Diaphragms PTFE, FKM
Process Vapor Temp. Range FKM: -40° to 275° 
PTFE: -40° to 220°F
Over Mold: -40° to 220°