Some people like it HOT!
This heater can be used to heat up ethanol or other thermal transfer fluids in a recirculating system. It features a C1D1 explosion-proof rating. This can be used for a number different of functions, such as pre-heating liquid solvent before spraying it into a falling film tube to increase recovery rates, or heating up tubes to recover remaining solvent post-extraction. This opens up a variety of different options to recover solvent faster, and more efficiently.
This is especially useful for systems which swing material tube temperatures from cold during extraction to hot during recovery using our Iced Tech chiller, and Master Vapor Liquid Pump. This allows you to extract at ideal temperatures for making live resin and sauce, but still maintain solvent recovery rates only possible at higher temperatures.
FEATURES & BENEFITS
- Indoor Use
- 99% Maximum Relative Humidity
- Maximum ambient temp : 140°F
- Download Product Manual
*STAND SOLD SEPARATELY*
Fuego Alcohol Heater Models
| Models | Motor | Pump |
|---|---|---|
| FUEGO-1PH |
2 HP 1 Phase |
No |
|
FUEGO-3PH FUEGO-ATEX |
2 HP 3 Phase |
No |
| Pumphead Charge | |
|---|---|
| Maximum Working Pressure |
7250 PSI |
| Voltage / Wattage / Current* | 240VAC 5400 Watts 22.5 Amps |
| Fluid Passage Heat Transfer Area | 210^in2 |
| Fluid Passage Dimensions |
H: 0.41in W: 0.32in L: 3x48in |
| Thermometer Range |
64° - 250°F |
| Wetted Parts |
Stainless Steel Anodized Aluminum Electroless Nickel-Plated Steel, PTFE |
| Temp. Control Operating Range | 84° - 219° |
| Input Fluid Temperature | -40° - 225°F |
| Weight |
51lb |
| Heat Transfer Fluids | Water, Oil, Glycol |
