The ORIGINAL Master Vapor Pump
C1D1 rated for use in hazardous locations. It can be used to transfer hydrocarbons, alcohols, and many other solvent vapors up to a maximum operating pressure of 60PSI. Wetted parts of the pump do not need any grease, ensuring clean operation, and no contamination of extract.
To ensure safe operation, the back of the diaphragm chamber is pressurized with CO2 as a failsafe to prevent oxygen from getting into the system, in the event of any part failures. Being easy to maintain and operate, as well as efficient in power usage, these pumps are well suited to a wide variety of solvent recovery applications.
FEATURES & BENEFITS
- For LP-Gas Recovery
- Electric-Powered
- Dual - Diaphragm
- Explosion-proof Motor
- Stainless Steel wetted parts
- Rated MAWP: LPG-350-PSI
- Download Operators Manual
- Download Data Sheet
- Download Repair Manual
MVP-60 Models
| Models | Motor | Pump |
|---|---|---|
| MVP-60-1PH | 1 HP 1 Phase |
Yes |
| MVP-60-3PH MVP-60ATEX |
1 HP 3 Phase |
Yes |
| Pumphead Charge | |
|---|---|
| Flow Rate | 6 cfm |
| Butane Recovery Rate | 1-2 lb/min |
| Butane Re-Condense Rate | 12 GPH |
| Maximum Pumping Outlet Pressure, cnt. | 60 PSI |
| Maximum Pumping Outlet Pressure, int | 70 PSI |
| Maximum Pumping Inlet Vaccuum Produced | 27 inHg |
| Center Section Co2 Charge Range, cnt. | 5 - 70 PSI |
| Center Section Co2 Charge Range, int. | 80 PSI |
| Equipment Withstand Pressure | 350 PSI |
| Maximum Co2 Consumption | <0.2 scfh |
| Co2 Inlet Size | 1/4 in. npt(f) |
| Maximum Pump Speed | 190 cpm |
| Process Inlet And Outlet Size | 1/2 in. JIC male |
| Optional Pressure Gauge Ports: inlet / outlet | 1/4 in. npt(f) |
| Weight | 182.5 lb |
| Noise Data | |
|---|---|
| Sound Power (measured per ISO-9614-2) | 70 PSI |
| Sound Pressure (tested 3.28 ft [1m] from equip.) | 5-80 PSI |
| Electrical / Maintenance - MVP-6CFM-1HP | |
|---|---|
| Power | 1 HP |
| Speed | 1800 rpm (60Hz) |
| Gear Ratio | 9.41 |
| Voltage | 3-phase 208-230/460V |
| Maximum Amperage Load | 3.3A (230V) / 1.65A (460V) |
| Electrical / Maintenance - MVP-6CFM-3HP | |
|---|---|
| Power | 1 HP |
| Speed | 1800 rpm (60Hz) |
| Gear Ratio | 9.41 |
| Voltage | 1-phase 115/208-230V |
| Maximum Amperage Load | 13.4A (115V / 2.7A (230V) |
| Materials | |
|---|---|
| Process Pressure and Reed Valves | Stainless steel |
| Diaphragms | FKM fluoroelastomer, PTFE |
| Process Vapor Temp. Range | FKM: -40° to 275° PTFE: -40° to 220°F |
